CAUTIONS
•Read entire installation instructions carefully before beginning instal- lation and save these instructions.
•To avoid possible risk of electrical shock and fire, install this light fix- ture only on Hunter TribecaTM fans, models 28120, 28121 and 28122. Note: To find the fan model number, check the ceiling fan package or on the nameplate label located on top of the motor housing of the ceiling fan.
WARNINGS
•To avoid possible electrical shock, before installing light fixtures dis- connect power by turning off the circuit breakers both to the outlet box and to its associated wall switch location. If you cannot lock the circuit breakers in the off position, securely fasten a prominent warn- ing device, such as a tag, to the service panel.
•Connect house wiring to the fan before attaching the light fixture to the fan.
•All wiring must be in accordance with national and local electrical codes. If you are unfamiliar with wiring, you should use a qualified electrician. Professional installation is recommended.
•To reduce the risk of fire or personal injury, allow bulbs and surround- ing surfaces to cool to room temperature before touching or remov- ing them.
Troubleshooting
Light does not come on.
1.Push the light button on the remote transmitter. Verify remote operation. Refer to fan manual for remote operation and troubleshooting.
2.Make sure bulbs are installed properly and filament is not blown.
3.Make sure breakers or fuses are on.
4.Verify that the light power lead is connected at the ceiling. Refer to your ceiling fan manual for locating assembly and wiring.
Glass rattles.
1. Make sure the glass globe is secure.
is light fixture is for use only on Hunter TribecaTM Ceiling Fans, models 28120, 28121, and 28122.
For other problems or ques- tions, contact the Hunter Fan Company Technical Support at
1-888-830-1326 or
techsupport@hunterfan.com.
