Operating Your Air Purifier
On/Speed Control: Rotate the Speed Control knob to set the desired speed.
Unit off
Low speed - Recommended for use when soft background noise is unwanted.
Medium Speed - Typical usage setting. 
Soft background noise is not an issue.
High speed - Use when quick, efficient results to a room’s air quality are desired.
The fan speed can be adjusted at any time.
Press the Ionizer button to turn on the Ionizer function of your air purifier. The Ionizer Light will glow while the Ionizer is activated.
NOTE: DO NOT run the ionizer if tobacco smoke, air fresheners, dripless wax candles, or grease from cooking is present.
Ionizer | On/Speed |
| Control |
Ionizer |
|
Indicator |
|
counter, rotate the calendar ring to align the filter symbol (
) with the month that you installed the filter. Since the filter is designed for 6 months use, the second indicator (
) will serve as a reminder to check the filter every 6 months. If the HEPAtech filter (
) is checked in April, then the filter would need to be checked again (
) in October.
) on the ring with the month that you installed the 
) on the outer knob points to the month in which you should install a new 
) in July means the filter would need to be replaced again (
) in October.
Power
Indicator
| Filter Calendar |
| |
Figure 1 - Purifier Controls | |
Filter Change Calendar: The filter counter is designed to optimize the performance of the air purifier by reminding you when to change the HEPAtech Filter and
HEPAtech Filter Calendar: The HEPAtech Filter indicator is located in the center of the calendar ring. To set the HEPAtech Filter
Figure 2 - Calendar Control
Cleaning and filter Replacement
1.Clean the outside of the unit with a soft, damp cloth. Figure 3.
2.At least every 90 days, open the front grill, remove the carbon
3.Every 6 months you should remove the front grill and check the HEPAtech filter to see if it needs to be replaced. Compare the color
©2010 Hunter Fan Company | 3 |
