Operation

Filter Life Counters

The pre-filter and filter are critical to the proper operation of the air purifier. To help you know when to change the filters, your Hunter Air Purifier has Filter Life Counters that will monitor the percentage of life your filter has left. Although the exact life of the filters depends on the environment, the table below gives typical usage times of the filters.

Table 2: Typical Usage Times of the Filters

Filter Type

Typical Usage

 

 

Activated Carbon Pre-Filter

1400 hours

 

 

HEPAtech® Filter

2800 hours

 

 

The display shows the percentage of life left since the counter was reset. NOTE: The percentage level drops in 5% increments.

The values of the Pre-Filter and Filter Life Counters are stored in the air purifier’s memory. The unit may be unplugged and moved or stored without losing the Pre-

Filter and Filter Counter values.

To properly track filter usage, the Pre-Filter and Filter Life Counters should be reset each time the filters are changed. Refer to Changing the Pre-Filter (pg. 9) or Changing the Filter (pg. 10) for instructions on how to reset the counters.

Locking/Unlocking the Keypad

Once you enter the desired speed, you may want to lock the keypad to prevent accidental changing of the speed. When the keypad is locked, all keys will be disabled. If you press a key, the Keypad Locked Indicator will be displayed on the screen for 1-2 seconds.

To Lock or Unlock the Keypad:

 

1.

To lock the keypad, press and hold the UP/DOWN keys

 

 

 

simultaneously for 2-3 seconds. The Keypad Locked In-

 

 

dicator will appear on the display. Refer to Fig. 6. After

 

 

releasing the keys, the Keypad Locked Indicator will dis-

 

 

appear.

 

 

 

 

2.

To unlock the key pad, press and hold the UP/DOWN

Fig. 6

 

keys simultaneously for 2-3 seconds. The Keypad Indi-

 

 

cator will disappear and the keypad will be functional.

 

 

7

41773-01

41773-01.pmd

7

4/15/05, 10:54 AM