Using Your Air Purifier
1.Remove your air purifier from the box and take it out of the clear plastic protective bag.
2.Place your HEPAtech™ Air Purification System on a firm, flat surface.
3.Before turning the Air Purifier ‘on’, you need to open the front grill. To release the front grill, place your fingers behind the tabs and pull forward.
4.The filter will be installed in the correct position. Grasp the filter and pull it forward. Remove the plastic wrapping and replace the filter in the unit. The white filter material should be facing outward (towards you) and the wire mesh side should be hidden from view (inside the unit).
5.Replace the front grill. Be sure that the bottom tabs are in location first, and then push the top of the grill forward until it is closed. The unit is now ready for normal operation. NOTE: This unit will not operate unless the door is placed in the correct position.
6.Plug the unit into a 120V electrical outlet.
Cleaning And Filter Replacement
1.Clean the outside of the unit with a soft, damp cloth. The front grill can be removed and cleaned in soapy water.
2.At least every 90 days, open the front grill, remove the carbon
3.While replacing the
Replacement Filters:
To obtain replacement filters for your air purifier, first determine your model number by looking at the information label on the back of the air purifier. The model number will be listed on the label. Then, call
Air Purifier Mdl. No.: | 30381 | 30382 |
|
Filter Mdl. No.: | 30931 | 30931 |
|
30901 | 30901 |
| |
| 4 | © 2005 Hunter Fan Company |
4 | 2/28/05, 4:58 PM |