Hunter Fan 30700, 30701 owner manual Positioning Your Air Purifier, How the HEPAtech System Works

have arrows on the side to indicate air flow and the direction the filter should be placed back into the unit.

6.Ensure the disk on the back of the front grill knob is facing flat side out. Figure 3. Place the latches over the arms on the unit and gently push the front grill back in place. Twist the knob until the Hunter logo is facing up.

The ionizer charges any remaining particles causing them to clump together and fall to the floor or surface where they can be removed by cleaning. Clean, purified air is then released into the room through the side grill. (Figure 4.)

Positioning Your Air Purifier

Your new Hunter Desktop Air Purifier can be setup to operate either standing up or turned on it’s side. To run the Air Purifier on it’s side:

1.Turn the unit off and unplug from power.

2.Locate the Rubber Feet located on the side of the Air Purifier. Figure 5.

Side Notch	Flat Disk Side	Rubber Feet
	Figure 3.

6. Plug the unit into a 120V electrical outlet.

How the HEPAtech® System Works

HEPAtech®Front

Ionizer Filter Pre-Filter Grill

Figure. 4.

Figure 5.

3.Turn the unit so that it rests on the rubber Feet. Figure 6.

Note: The Hunter logo on the knob of the door can be turned to face upward without unlocking.

Vertical

Horizontal

Dust and other irritants are pulled into the air purification system by the fan. The carbon pre-filter attracts larger particles like, pet dander, hair, and odor causing particles and traps them on the pre-filter. Smaller particles such as dust, mold, and pollen pass through the pre-filter and are captured by the

HEPAtech® filter. Up to 99.97% of particles as small as .1 microns can be captured.

©2009 Hunter Fan Co.

Figure 6.

4. Plug your Desktop Air Purifer back in.

4 43066-01 20091221