43010-01 10
Operation
To turn the ionizer on or o:
1. To turn the ionizer on, press the IONIZER key. The Ionizer
Indicator will appear on the display. Refer to Fig 10.
2. To turn the ionizer o, press the IONIZER key. The Ionizer
Indicator will disappear.

Resetting the Air Purier

In the unusual situation that the unit or the display is exhibiting erratic behavior, you may
want to reset the air purier. If you still have problems after resetting the air purier, please
contact Hunter for additional assistance (refer to Technical Assistance, pg. 14).
To Reset the Air Purier:
1. Unplug the unit for at least 30 seconds.
2. Plug the unit back in.

Using the Ionizer

Using the ionizer improves the quality of air in the room. Negative ions are released into the
air and positively charged dust, smoke, and pollen particles are attracted to the negative
ions. These particles settle out of the air and can be vacuumed up during normal cleaning.
These particles are also more easily captured by the HEPAtech® lter as they pass through
the HEPAtech® Filtration System. To ensure the best air circulation in the room, we recom-
mend that you place your air purier six (6) inches away from any walls.

Controlling the Backlight

Your air purier display has a backlight that is continuously lit as long as there is power to
the unit. The backlight may be turned o.
To turn the backlight o or on:
Press the PRE-FILTER RESET and FILTER RESET keys at the same time.
NOTE: Do not hold down the keys for longer than 2 seconds. This may reset a
lter counter.
and
Fig. 10