Humidifier Assistance | 4 |
Troubleshooting |
|
Problem: |
|
Excessive noise. |
|
Solution: |
|
1. Check the Water Tank to make sure it is properly seated on the base. |
|
2. Check the Water Tank to make sure there are no bubbles when the Water Tank |
|
is full and running. If there are bubbles, turn the unit OFF until the bubbling stops. |
|
When the bubbling has stopped, set the unit to the desired speed. |
|
Problem: |
|
Humidifier not working. |
|
Solution: |
|
1. Make sure the Power Knob is not set to OFF. |
|
2. Adjust the humidity level using the Humidity Knob. Once the room reaches the |
|
set humidity level, the humidifier will turn OFF; this is normal. |
|
Problem: |
|
Mineral
Solution:
1. Refer to the section “Cleaning and Storage” on page 8.
Problem:
Humidity output and water usage decreased.
Solution:
1.Check the Humidistat Knob and Power Knob to make sure they are set to the desired humidity level and speed.
2.Check the Water Tank to make sure there are no bubbles when the Water Tank is full and running. If there are bubbles, turn the unit OFF until the bubbling stops. When the bubbling has stopped, set the unit to the desired speed.
3.Clean any components that have mineral
8 | |
|