Using Your Humidifier | 2 |
|
|
Controls |
|
Operation:
See Figure 6.
Humidity Control:
The humidity control allows you to set the amount of humidity you want the unit to output. The humidity knob is a percentage, ranging from 30% at its lowest to 80% at the highest. Turn the knob clockwise to increase humidity output. When the humidifier has reached the set humidity level, it will shut off until the humidity level drops again. To turn
the unit off, turn the the humidity knob past the lowest setting to off.
Indicators:
UVC Indicator: When the UVC indicator lights up, it is time to replace the UVC Bulb in the bottom of the unit. Replacing the bulb will reset the indicator.
Demineral Indicator: When the demineral indicator lights up, it is time to replace the demineralization cartridge in the base of the unit, if you are using one. Remove the tank from the unit, and the demineralization cartridge should be sitting inside the water tray in the bottom. Hold the reset button down under the indicator for a few seconds until the light goes out to reset.
Refill Tank Indicator: This indicates the tank is out of water. Once you have refilled the tank with water and set it back onto the unit, the refill tank light will reset.
UVC | Demineral |
O
Rell Tank
Figure 6
6 | |
|
