43002-01 05/30/2007 5 © 2007 Hunter Fan Co.
Figure 2
Humidier Parts (continued)

Control Panel

Power
Timer Humidity
NiteGlo™
Rell Tank
LED (Red)
Speed
Power: Turns the humidier on and off. the power should always be off before unplugging the
humidier, moving the humdier, or relling the water tank.
Rell Light: The red LED turns on to signal that the humidier has automatically turned off and
the Water Tank needs to be relled.
Humidity: Enables you to set the desired maximum humidity level. Once this level is reached,
the unit will autimatically shut off until the humidity level drops. NOTE: The humidier may
not ne running because the Span Setting may need to be adjusted.
Speed: Sets the humdier’s fan speed to Low (1), Medium (2), or High (3).
Timer: Sets the humidier to run for 2, 4, 8, or 10 hours. when the timer is not used, the humidi-
er will run and cycle automatically.
LEd display