For the most effective and safe use of Hunter’s Vaporizer, please Read and
Save these instructions! Especially those regarding adding salt.
• ALWAYS place this vaporizer on a firm, level, and water resistant surface. ALWAYS place the vaporizer at least six (6) inches away from walls and heat sources such as stoves, radiators, or heaters.
• ALWAYS place the vaporizer in an area that is out of the reach of children especially infants or toddlers. Supervision is necessary when the vaporizer is used near children, patients, or pets. Hunter realizes that
6. When using vaporizer medications, fill the medicine cup on the steam unit as directed by the medicine package. Figure 4.
NOTE: DO NOT add medication of any type into the water in the tank.
7. Plug the power cord into 110-120 Volts AC outlet protected up to 15 Amps. The vaporizer will produce a gentle flow of steam within a few minutes.
Over Filled
MAX
Fill to here
MIN
Minimum Level
Figure 3.
3. Let all water drain back into the tank.
4. Turn the tank upside down and empty any water into a sink or tub.
5. Create a 50/50 solution of vinegar and water which should be 1/2 gallon vinegar and 1/2 gallon water. Pour this solution into the tank. Be sure to only fill the tank to the MAX line as indicated on the water level window on the front of the tank.
6. With the steam unit unplugged, place it back into the tank and soak for 30 | |
minutes. After soaking for 30 minutes, remove the steam unit. | Figure 6. |
7. Empty the solution from the tank and rinse the tank. Fill the tank with tap
many customers use vaporizers in their homes with small children. Please take the time to instruct children that the vaporizer is not a toy. Vaporizers produce steam that could cause serious burns.
8. If steaming does not start within ten minutes, unplug the steam unit and allow to cool.
9. Remove the Steam unit from the tank and add 2 to 3 pinches of ordinary table salt to the water and mix thoroughly.
water to the MAX line as indicated on the water level window on the front of the tank. Place the steam unit back into the tank for 30 seconds. Remove the steam unit and empty the water. Repeat the rinsing steps until the vinegar smell is gone.
• This product has a polarized plug (one blade is wider than the other) as a safety feature. This plug will
fit into a polarized outlet only one way. If the plug does not fit | fully into the outlet, reverse the plug. If it |
still does not fit, contact a qualified electrician. DO NOT attempt | to defeat or override this safety feature. |
• ALWAYS UNPLUG the vaporizer when it is not in operation or while it is being emptied, filled or cleaned.
• The vaporizer should always be placed at least four feet from a bedside and out of reach of the patient or children.
• Always ensure the vaporizer is sitting flat on the surface it is placed and not resting on the cord or other obstructions. Ensure the vaporizer cord is tucked away as to prevent the vaporizer form being upset or turned over.
• DO NOT add medication of any type into the water in the container. Do not cover the steam outlet or place anything over it while the vaporizer is operating. Never drop or insert any object into any opening.
• Never fill the humidifier tank with hot water. Always use clean, cool tap water.
2 | Using Your Humidifier |
Initial Setup and Operation |
11. If steaming still does not start after another 10 minutes, add another | |
pinch or two of salt and mix thoroughly. Do not exceed 1/8 teaspon of | |
salt, about 4-5 pinches, as excessive boiling or a blown fuse could occur. | |
Note: Remember the amount of salt you added to start the unit steaming. You | |
will need to add the same amount each time the unit is refilled. Salt has no | Figure 4. |
effect on the purity of the steam or medication. |
The vaporizer will automatically stop producing steam when the water has reached the minimum level indicated by the water level in the window on the front of the unit. Figure 3. The power light will remain on indicating that the vaporizer is still plugged in. ALWAYS unplug the steam unit and allow to cool before removing the tank.
3 | Maintenance |
Cleaning and Storage |
Note: ALWAYS unplug the steam unit from the electrical outlet and allow the unit to cool before cleaning. Never remove the Steam Unit while it is plugged in, electrocution or burning could occur. DO NOT attempt to disassemble the steam unit. Never allow water to sit in the tank when not in use.
Note: The tank has built-in antimicrobial properties to inhibit the growth of bacteria, mold, and fungi that may affect the water in the tank. Daily and weekly maintenance are still necessary to prevent the growth of bacteria, mold, and fungi.
End of Season Maintenance: | |
1. Follow the instructions for weekly maintenance before storing the unit. | MAX |
| |
2. Ensure all parts are completely dry before storing the unit. | Figure 7. |
|
3. Store the unit in a cool dry place.
4. Never store the unit with water in the tank.
4 | Humidifier Assistance |
Troubleshooting |
1. Remove the plastic bag covering from the vaporizer. 2. Unravel and straighten the cord before use.
3. Remove the steam unit from the tank. Twist the steam unit counter-clockwise until the power cord lines up beside the unlock symbol and lift it out of the tank. Figure 1 and 2.
Power Cord
Daily Maintenance:
1. Unplug the steam unit and allow it to cool.
2. Remove the steam unit by turning counter-clockwise until the power cord is beside the unlock graphic and lift it out of the tank.
A. Vaporizer does not operate or steams too slowly:
1. Make sure the vaporizer is plugged in and the power light is on.
2. If the power light is not on, you may have a blown fuse, tripped a circuit breaker, or a defective electrical outlet. Try a different outlet or check your breaker or fuse in the house.
mark in the Water Level Window. DO NOT OVERFILL. Figure 3.
CAUTION: DO NOT use the vaporizer with extension cords.
Caution: Never fill the humidifier with hot water.
5. Replace the steam unit in the tank with the power cord lining up beside the unlock symbol. Twist the steam unit clockwise until the power cord lines up beside the lock symbol.
NOTE: Protect your floor and furniture by placing the vaporizer on a non- metallic, waterproof, heat-resistant surface.
4. Turn the tank upside down and drain any water into a sink or tub. Shake the unit gently to remove any remaining water.
5. Rinse the tank thoroughly with water, empty, and wipe with a dry, clean cloth. Figure 5. 6. Wipe the steam unit shaft with a dry cloth. Figure 6.
7. If the medicine cup was used, wipe it out with a slightly damp clean cloth. Figure 7. 8. Refill the tank as directed under “initial setup and operation” and resume use.
Weekly Maintenance:
1. Unplug the steam unit and allow it to cool.
2. Remove the steam unit by turning counter-clockwise until the power cord is beside the unlock graphic and lift it out of the tank.
I. Unplug the vaporizer from the electrical outlet and allow to cool.
II. Remove the steam unit allowing hot water to first dribble out, then add one or two pinches of salt to the water and mix thoroughly.
III. Replace the steam unit and plug in the vaporizer. It should steam within 5 minutes. If it does not, add salt only by the pinch, since too much salt can cause excessive boiling or blowing of fuse.
4. If the vaporizer has been operating normally and is now failing to steam, it may need to be cleaned. See the weekly maintenance section under ”Cleaning and Storage” on page 5.
44051-01 • 06/10/2010 | ©2010 Hunter Fan Company |
