Hunter Fan 41818-01 If you want to install the light fixture, proceed with step

	7 • Completing Your Installation With or Without a Light Fixture
			Your Hunter fan comes with an integrated light fixture assembly and an
			optional switch housing cap and plug button. This feature gives you the
			option of installing the fan with OR without the included light fixture.
			The steps below direct you whether or not you are installing a light
			fixture.
			WARNING: Use only the light fixture supplied with this fan model.
			7-1.	To attach the upper switch housing, partially install two housing
				assembly screws into the switch housing mounting plate.
			7-2.	Feed the upper plug connector through the center opening of the
				housing.		7 • Completin
						Installation W
			7-3.
				Align the keyhole slots in the housing with the housing assembly
Steps 7-1 – 7-3				screws.		Without a Lig
	Housing
		Upper	7-4.	Turn the housing counterclockwise until the housing assembly(Continued)
	Assembly
	Screw	Switch		screws are firmly situated in the narrow end of the keyhole slots.
		Housing
				Install the remaining screw into the housing. Tighten all three
				screws firmly.
					CAUTION: Make sure the upper switch housing is securely
					attached to the switch housing mounting plate. Failure to properly
					attach and tighten all three assembly screws could result in the
					switch housing and light fixture falling.
			7-5.	If you want to install the light fixture, proceed with step 7-6
				now.
				If you do not want to install the light fixture, proceed with step
				7-10 now.

Step 7-4

11

41818-01 • 03/12/09 • Hunter Fan Company