7 • Completing Your Installation With or Without a Light Fixture (Continued)
12
Installing the Glass Bowl
1.First install two B10 candelabra bulbs (60 Watt Maximum) into the sockets.
2.Attach the extra pull chain (included) to the fan pull chain using the plastic breakaway connector. (You may find the plastic breakaway connector on the end of the extra chain.)
3.Thread the fan pull chain through the hole in the metal disk. Then, thread the fan pull chain through the hole in the center of the glass bowl.
4.Thread the light pull chain through the hole in the center of the glass bowl.
5.Place the cover plate up against the glass bowl. Align the holes in the cover plate and glass bowl.
6.Thread the fan pull chain and light pull chain through the appropriate holes.
7.Thread the light pull chain
through the finial and screw the | Light Bulbs | Metal Rod | ||
finial onto the threaded rod end | (B10 |
| ||
until tight. | Candelabra | Metal Disk | ||
|
|
| Base 60 Watt |
|
|
|
| Maximum) |
|
|
|
|
| Glass Bowl |
|
|
|
| Cover Plate |
|
|
|
| |
| Breakaway |
| ||
|
| Finial | ||
| Connector |
| ||
Hunter Fan Company |
