Hunter Fan 42426-01 Getting Ready, Gathering the Tools, Checking Your Fan Parts

1 • Getting Ready

To install a ceiling fan, be sure you can do the following:

•Locate the ceiling joist or other suitable support in ceiling.

•Drill holes for and install wood screws.

•Identify and connect electrical wires.

•Lift 40 pounds.

If you need help installing the fan, your Hunter fan dealer can direct you to a licensed installer or electrician.

Gathering the Tools

You will need the following tools for installing the fan:

•Electric drill with 9/64” bit

•Keyhole saw

•2’ x 4’ support brace

•UL-approved octagonal 4” x 1-1/2” outlet box

•Two #8 x 1-1/2” wood screws and washers

•Approved connector for electrical wire

•Standard screwdriver (magnetic tip recommended)

•Phillips-head screwdriver (magnetic tip recommended)

•Wrench or pliers

•Ladder (height dependent upon installation site)

Checking Your Fan Parts

Carefully unpack your fan to avoid damage to the fan parts. Refer to the included Parts Guide. Check for any shipping damage to the motor or fan blades. If any parts are missing or damaged, contact your Hunter dealer or call Hunter Technical Support Department at 888-830-1326 (In Canada, call 866-268-1936).

6

Installing Multiple Fans?

If you are installing more than one fan, keep the fan blades and blade irons (if applicable) in sets, as they were shipped.

42426-01 • 03/29/10 • Hunter Fan Company