Hunter Fan 42507-01 warranty lower switch housing assembly

7 • Completing Your Installation With or Without a Light Fixture (Continued)

		7-6. To attach the lower switch housing, connect the upper plug
		connector from the motor to the lower plug connector in the
		lower switch housing assembly.
	Plug	Note: Both plug connectors are polarized and will only fit together
		one way. Make sure the connectors are properly aligned before
	Connector
		connecting them. Incorrect connection could cause improper
		operation and damage to the product.
Steps 7-6 – 7-7		7-7. Place the lower switch housing assembly over the upper switch
		housing. Align the side screw holes in the upper and lower switch
Lower Switch		housings. Attach the lower switch housing to the upper switch
		housing with three housing assembly screws.
Housing
		If you are not installing the light fixture, your installation is
Plug		complete. Otherwise, proceed with step 7-8.
Connector		7-8. The last installation step when installing the light fixture is to
Detail
		install the glass bowl. See “Installing the Glass Bowl” on page 14 for
12		instructions.
Housing
Assembly Screw

Hunter Fan Company 42507-01 • 02/26/07