Hunter Fan 42624-01 warranty Steps, Lower Switch Housing Plug 12Connector Detail

7 • Completing Your Installation With or Without a Light Fixture (Continued)

Steps 7-6 – 7-7

Lower Switch

Housing

Plug

12Connector

Detail

Plug Connector

7-6. To attach the lower switch housing, connect the upper plug connector from the motor to the lower plug connector in the lower switch housing assembly.

Note: Both plug connectors are polarized and will only fit together one way. Make sure the connectors are properly aligned before connecting them. Incorrect connection could cause improper operation and damage to the product.

7-7. Place the lower switch housing assembly over the upper switch housing. Align the side screw holes in the upper and lower switch housings. Attach the lower switch housing to the upper switch housing with three #6-32 x 3/8” housing assembly screws.

If you are not installing the light fixture, your installation is complete. Otherwise, proceed with step 7-8.

7-8. The last installation step when installing the light fixture is to install the glass bowl. See “Installing the Glass Bowl” on page 13 for instructions.

Housing Assembly Screw

Hunter Fan Company 42624-01 • 12/01/06