Hunter Fan 42639-01 warranty Assembling the Blades

6 • Assembling the Blades

Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan).

6-1. Your fan may include blade grommets. If your fan has grommets, insert them by hand into the holes on the blades.

6-2. If your fan includes medallions:

Place each blade between a blade iron and medallion. Install three blade screws to attach the medallion to the blade iron. Repeat for all blades.

If your fan includes standard blade irons:

Attach each blade to a blade iron using three blade assembly screws. If you used grommets, the blades may appear slightly loose after screws are tightened. This is normal.

6-3. Some blade mounting screws are installed in the motor to secure shipping blocks. Remove the blade mountings screws and rubber bumpers from the motor. Save the screws and discard the bumpers.

6-4. For each blade, insert one blade mounting screw through the blade iron, and attach lightly to the fan. Insert the second blade mounting screw, then securely tighten both mounting screws.

Step 6-1 (Detail)

Grommet



Blades without medallions Steps 6-1 – 6-2

Use without grommet

Blade Assembly

Screws

Blades with Medallions

Steps 6-1 – 6-2

Step 6-4

Blade

Mounting

Screw

42639-01 • 4/5/07 Hunter Fan Company