Hunter Fan 42651-01 installation manual lower switch housing assembly

7 • Completing Your Installation With a Bowl Light Fixture (Continued)

7-5. To attach the lower switch housing, connect the upper plug
connector from the motor to the lower plug connector in the
lower switch housing assembly.
Note: Both plug connectors are polarized and will only fit together
one way. Make sure the connectors are properly aligned before	Plug
connecting them. Incorrect connection could cause improper	Connector
operation and damage to the product.
7-6. Place the lower switch housing assembly over the upper switch	Steps 7-6 – 7-7
housing. Align the side screw holes in the upper and lower switch
housings. Attach the lower switch housing to the upper switch
housing with three housing assembly screws.	Lower Switch
	Housing
Note: In compliance with US federal energy regulations, this	Plug
ceiling fan contains a device that restricts the light kit to a
	Connector
maximum of 190 Watts. Exceeding that limit or the marked
	Detail
limit on this product may result in fire hazard or improper
operation.
	Housing
	Assembly Screw

11

42651-01 • 09/25/08 • Hunter Fan Company