7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)
Installing the Glass Bowl
the plastic breakaway connector. (You may find the plastic breakaway connector on the end of the extra chain.)
Breakaway
Connector
For Light Bulbs
pull chain through the hole in the center of the cover plate.
Thread the fan pull chain through | Metal Disk | |
| the grommet hole in the side of | |
|
| |
| the cover plate. |
|
Place the cover plate up against |
| |
| the glass bowl. Align the holes in | Metal Rod |
| the cover plate and glass bowl. |
|
Thread the light pull chain |
| |
| through the finial and screw the |
|
| finial onto the threaded rod end | Glass Bowl |
| until tight. |
|
Reattach the fandangle to the |
| |
| extra pull chain. | Cover Plate |
|
| Finial |
12