Hunter Fan Type 2 Models, 42669-01 installation manual Uninstalling the Light Fixture

7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)

Uninstalling the Light Fixture

7-14. To uninstall the light fixture, first disconnect the plug connectors between the black wire and the black/white wire.

7-15. Disconnect the plug connectors between the two white	Lower Switch
	Housing
wires.

7-16. Uninstall the connector and washer from the end of the light fixture inside the lower switch housing.

7-17. Unscrew the threaded rod of the light fixture from the lower switch housing.

7-18. Remove the light fixture from the lower switch housing pulling disconnected wires through the hole in the center of the lower switch housing.

	Note: When removing the wires, pull the thin plug
	connector (male) through first, and then pull the other
	plug connector (female) through the hole.				Threaded Rod
7-19. Install the dummy terminals (included in the sack parts)
	on the two disconnected wires in the lower switch
	housing.
7-20. Install the switch housing cap and plug button to the
	lower switch housing.			Steps 7-17 – 7-18
7-21. Once you have uninstalled the light fixture, continue
	with step 7‑6.
		Male Dummy
		Terminal	Cap
		Female Dummy
		Terminal	Plug Button		Step 7-20

13

42669-01 • 09/10/09 • Hunter Fan Company