7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)
Installing the Glass Bowl
7-8. First install the included CFL bulbs.
7-9. Attach the extra pull chain (included) to the fan pull chain using the plastic breakaway connector. (You may find the plastic breakaway connector on the end of the extra chain.)
7-10. Thread the fan pull chain through the hole in the metal disk. Then, thread the fan pull chain through the hole in the center of the glass bowl.
7-11. Thread the light pull chain through the hole in the center of the glass bowl.
7-12. Place the cover plate up against the glass bowl. Align the holes in the cover plate and glass bowl.
7-13. Thread the fan pull chain and light pull chain through the appropriate holes.
7-14. Thread the light pull chain through the finial and screw the finial onto the threaded rod end until tight.
Pull Chain
Breakaway
Connector
For Light
Bulbs
(60 Watt
Maximum)
Metal Rod
Metal Disk
Glass Bowl
Cover Plate
Finial
42674-01 • 12/17/08 • Hunter Fan Company