7 • Completing Your Installation With a Bowl Light Fixture (Continued)
Installing the Glass Bowl
7-3. Install candelabra bulbs (60 Watt Maximum) into the sockets.
7-4. Thread the light and fan pull chains through the hole in the center of the glass bowl. Then, thread the light pull chain through the hole in the center of the cover plate.
7-5. Thread the fan pull chain through the grommet hole in the side of the cover plate.
7-6. Place the cover plate up against the glass bowl. Align the holes in the cover plate and glass bowl.
7-7. Thread the light pull chain through the finial and screw the finial | For Light Bulbs |
|
onto the threaded rod end until | |
tight. | | |
7-8. Attach the extra pull chains | | |
(included) to the light and fan | | Metal Disc |
pull chains using the plastic | |
| |
breakaway connector. (You | | |
may find the plastic breakaway | | |
connector on the end of the extra | | Metal Rod |
chain.) | |
| |
| | | | Glass Bowl |
| | | | Cover Plate |
| Breakaway | |
| | |
| Connector | | Finial |
| | | |
| | | | |
11
42695-01 • 09/08/09 • Hunter Fan Company