methods of operation
6.CREATING CUSTOM PROGRAMS
•Program times can be set in 10 minute increments.
•Program temperature can be set in increments of 1o F (1o C).
•After 15 seconds of inactivity during programming, the thermostat will return to Normal Display mode.
•When setting each program time, note the AM/PM indicator.
•Press Hold/Return at any time to exit Program mode and save your settings.
•During normal operation, if no button is pressed for 5 seconds, the unit will return to the Normal Display mode.
1.Slide the system switch to HEAT or COOL to program the corresponding system.
2.Press Program to enter Program mode. (The LCD will begin to flash)
39
