Hunter Fan warranty 42762-01 07/19/07 Hunter Fan Company

7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)

7-10.To attach the lower switch housing, connect the upper plug connector from the motor to the lower plug connector in the lower switch housing assembly.

Note: Both plug connectors are polarized and will only fit together one way. Make sure the connectors are properly aligned before connecting them. Incorrect connection could cause improper operation and damage to the product.

7-11.Place the lower switch housing assembly over the upper switch housing. Align the side screw holes in the upper and lower switch housings. Attach the lower switch housing to the upper switch housing with three housing assembly screws.

If you are not installing the light fixture, your installation is complete. Otherwise, proceed with step 7-12.

7-12.Install one screw-in CFL (compact flourescent) bulb (19 Watt Maximum). Do Not use incandescent bulbs in this fixture.

7-13 Insert the globe into the fixture. Install and tighten the thumbscrews manually. Do not overtighten.

Note: If thumbscrews are pre-threaded, loosen the screws before inserting the globe, then retighten securely.

Plug

Connector

Steps 7-6 – 7-7

Lower Switch

Housing

Plug

Connector

Detail

Housing

Assembly Screw

CFL bulb (max 19W)

Globe

Steps 7-12 – 7-13

12

42762-01 • 07/19/07 • Hunter Fan Company