Hunter Fan 42834-01 installation manual Uninstalling the Light Fixture

8 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)

Uninstalling the Light Fixture

8-14. To uninstall the light fixture, first disconnect the plug connectors between the black wire and the black/white wire.

8-15. Disconnect the plug connectors between the two white
wires.
8-16. Uninstall the nut and washer from the end of the light	Lower Switch
fixture inside the lower switch housing.
8-17. Unscrew the threaded rod of the light fixture from the lower	Housing
switch housing.
8-18. Remove the light fixture from the lower switch housing
pulling disconnected wires through the hole in the center of
the lower switch housing.	Threaded Rod
Note: When removing the wires, pull the thin plug
connector (male) through first, and then pull the other plug
connector (female) through the hole.
8-19. Install the dummy terminals (included in the sack parts) on
the two disconnected wires in the lower switch housing.
8-20. Install the switch housing cap and plug button to the lower
switch housing.
8-21. Once you have uninstalled the light fixture, continue	Steps 8-16 – 8-18
with step 7‑6.

Male Dummy

Terminal

Female Dummy Terminal

Cap

Plug Button

Step 8-20

14

42834-01 • 01/27/10 • Hunter Fan Company