7 • Completing Your Installation With or Without a Bowl Light Fixture
Uninstalling the Light Fixture
7-11. Loosen and remove finial from threaded rod.
7-12. Remove Light kit from lower switch housing.
7-13. Disconnect the plug connector.
7-14. Place extra cover over the threaded rod.
7-15. Place breakaway connector on the end of the pull chain
7-16. Place breakaway connector inside of the finial and push pull chain back inside of the threaded rod.
7-17. Tighten finial on threaded rod.
Note: The breakaway connector should stop the pull chain from coming through the finial.
Plug |
Connector |
Rod |
Finial |
Steps 7-15 - 7-17 |
Rod | Chain |
|
Cap | |
Finial | |
21 | - |
Steps7-18 | - 7-221 |
42890-01 • 02/18/10 • Hunter Fan Company