Hunter Fan 44100 Troubleshooting, 30-31

Troubleshooting

Problem Solution

SCRAMBLED OR DOUBLE DISPLAY

(numbers over numbers)

NO DISPLAY

ENTIRE DISPLAY DIMS

PROGRAM DOES NOT CHANGE AT YOUR

DESIRED SETTING

AUTO/FAN DOES NOT COME ON

1. Remove clear mylar sticker.

1. Check battery connections and batteries.

2. Press reset button once with a small pin

and hold in for two seconds.

1. Replace batteries.

1. Check that time is set properly to “AM”

or “PM.”

2. Check that thermostat is not in "HOLD"

mode.

3. Check for correct day setting.

1. Move HG/HE system selector to opposite

position.

30-31

Contents

Main Page Table Of Contents Read This Before Installing Thermostat How This Thermostat WorksAnd Saves You Money 6-7 88:88 88 Features Page Page Page 10-11 Installation Page Page Mount Wallplate and Thermostat Figure 2 14-15 Heating system selector F/C selector (Fahrenheit/Centigrade) Installation Selector Switches Page 1 16-17 I2:00 72 3 I2:00 72 4 2 Setting the Time and Day of Week I9:00 72 W eekday Pr ogram 18-19 W eekend Program 20-21 Personal Program Schedule Autoprogram method Manual method Programming Your Thermostat Weekday Programs Step 1 Step 2 89:15 72 Programming Your Thermostat (Continued) 80:00 68 86:00 68 22-23 86:00 69 Continue for Weekend Programs 10:00 68 Weekday Program 89:15 72 24-25 86:00 68 Reviewing Programs To Review The Current Temperature Setting: 89:15 68 Temporary Manual Override of Program 86:70 68 If You Want to Change the Temperature Without Affecting Your Program: 89:68 60 26-27 89:70 60 Temporary Manual Override 89:55 72 Programming Your Thermostat (Continued) 89:15 55 Permanent Manual Override Operations 72 70 86:30 68 7I Filter Monitor Page Troubleshooting 30-31 Problem Solution Problem (Continued) Solution (Continued) Wiring Diagrams 32