Hunter Fan 45039-01 installation manual Uninstalling the Light Fixture

7 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)

Uninstalling the Light Fixture

7-14. To uninstall the light fixture, first disconnect the plug connectors between the black wire and the red wire.

7-15. Disconnect the plug connectors between the two white
wires.
7-16. Uninstall the connector and washer from the end of the	Lower Switch
light fixture inside the lower switch housing.
7-17. Unscrew the threaded rod of the light fixture from the lower	Housing
switch housing.
7-18. Remove the light fixture from the lower switch housing
pulling disconnected wires through the hole in the center of
the lower switch housing.	Threaded Rod
Note: When removing the wires, pull the thin plug
connector (male) through first, and then pull the other plug
connector (female) through the hole.
7-19. Install the dummy terminals (included in the sack parts) on
the two disconnected wires in the lower switch housing.
7-20. Install the switch housing cap and plug button to the lower
switch housing.
7-21. Once you have uninstalled the light fixture, continue	Steps 7-16 – 7-18
with step 7‑6.

Male Dummy

Terminal

Female Dummy Terminal

Cap

Plug Button

Step 7-20

13

45039-01 • 09/16/09 • Hunter Fan Company