Light Kit (continued)
www.HunterFan.com
1.888.830.1326
Install a bulb into each of
the sockets. When necessary, replace with bulbs of the same type and wattage.
Note: In compliance with US federal energy regulations, this ceiling fan contains a device that restricts its light output. Exceeding the
Metal |
Plate |
Globe |
Globe |
Keeper |
Finial |
Cap |
Finial |
Press the globe and globe keeper flush against the metal plate. Thread the light pull chain through the hole in the center of the finial cap and thread the fan pull chain through the hole in the side of the cap. Finally, thread only the light pull chain through the hole in the finial and screw the finial onto the threaded rod.
| Fan |
Light | Pull |
Pull | Chain |
Chain |
|
Connect the appropriate pull
chain pendant to each of the short
chains coming from the finial and finial cap. The fan pull chain controls the speed: from high to off. The light pull chain controls the light fixture: on and off.
See next page for fan operation instructions.
wattage limit marked on the MAX wattage sticker affixed to the light socket(s) may result in fire hazard or improper operation.
Note: Glass shade style and number of lights may vary.
13
