Light Kit (continued)
www.HunterFan.com
1.888.830.1326
Metal |
Plate |
Globe |
Globe |
Keeper |
Finial |
Cap |
Finial |
Install a bulb into each of | Press the globe and globe keeper |
the sockets. When necessary, | flush against the metal plate. Thread |
replace with bulbs of the same | the light pull chain through the hole |
type and wattage. | in the center of the finial cap and |
| thread the fan pull chain through the |
| hole in the side of the cap. Finally, |
| thread only the light pull chain |
| through the hole in the finial and |
| screw the finial onto the threaded rod. |
| Fan |
Light | Pull |
Pull | Chain |
Chain |
|
Connect the appropriate pull
chain pendant to each of the short
chains coming from the finial and finial cap. The fan pull chain controls the speed: from high to off. The light pull chain controls the light fixture: on and off.
See next page for fan operation instructions.
Note: Globe style and number of lights may vary.
Note: In compliance with US federal energy regulations, this ceiling fan contains a device that restricts its light output. Exceeding the wattage
15limit marked on the MAX wattage sticker affixed to the light socket(s) may result in fire hazard or improper operation.
