What to Expect with Your Installation
If you are unfamiliar with wiring, use a qualified electrician.
30 inches |
|
from blade tip |
|
to nearest wall |
|
or obstruction | 7 feet |
| |
| from bottom |
| edge of blade |
www.HunterFan.com 1.888.830.1326 
Read and Save These Instructions
This product conforms to UL Standard 507.
WARNINGS
w.1 - To reduce the risk of fire, electrical shock, or personal injury, mount fan directly from building structure and/or an outlet box marked acceptable for fan support of 70 lbs (31.8 kg) and use the mounting screws provided with the outlet box.
Must be able to secure the fan to building structure or
You may need a friend to help you.
Know your wiring
Ceiling angles greater than 34° will require an Angled Mounting Kit. See page 4 for details.
to the floor |
Assess location
1 Standard Downrod
for ceilings
2 Shorter Downrod
for fans installed close to ceiling
3 Longer Downrod
for ceilings 10 feet or higher
w.2 - To avoid possible electrical shock, before installing or servicing your fan, disconnect the power by turning off the circuit breakers to the outlet box and associated wall switch location. If you cannot lock the circuit breakers in the off position, securely fasten a prominent warning device, such as a tag, to the service panel.
w.3 - To reduce the risk of fire, electrical shock, or motor damage, use only Hunter Solid State Speed Controls.
w.4 - To reduce the risk of personal injury, do not bend the blade brackets when installing the blade brackets, balancing the blades, or cleaning the fan. Do not insert foreign objects in between rotating fan blades.
CAUTIONS
c.1 - All wiring must be in accordance with national and local electrical codes ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician.
Check box to see |
|
fan weight | Assess ceiling angle |
Select a downrod length
2
c.2 - Use only Hunter replacement parts.
