Existing Construction
B11 | EXISTING FAN |
B12
E |
Remove an existing fan and check to make sure the | Move the housing into position above the ceiling. |
opening is large enough to accommodate the new motor |
|
housing (7 1/4”x 7 3/4”). |
|
B13 | B14 |
| 2 |
| 1 |
Route wires through the strain relief. For supply connec-
tion, use wires suitable for at least 90º C (194º F).
Attach existing ducting to duct connector. Tape joints.
If ducting does not fit securely,
an adapter may need to be purchased.
B15 |
E |
Install the housing flush with the sheetrock and secure by
tightening the
8