Existing Construction – accessible only from below
D11 | EXISTING FAN |
D12 
F
Remove an existing fan and check to make sure the open- | Move the housing into position above the ceiling. |
ing is large enough to accommodate the new motor hous- |
|
ing (9”x 9.75”). |
|
D13
Route wires through strain relief.
D14 |
2 |
1 |
Attach existing ducting to duct connector. Tape joints.
If ducting does not fit securely,
an adapter may need to be purchased.
D15 |
F |
Install the housing flush with the sheetrock and secure by
tightening the
HF0023_EngS_3.29.06.indd 15
15
3/29/06 9:24:35 AM
