Existing Construction – accessible only from below
D11 | EXISTING FAN |
D12 
F
Remove an existing fan and check to make sure the | Move the housing into position above the ceiling |
opening is large enough to accommodate the new motor |
|
housing (9”x 9.75”). |
|
D13 | D14 |
| 2 |
| 1 |
Route wires through strain relief. For supply connection,
use wires suitable for at least 90˚ C (194˚ F).
Attach existing ducting to duct connector. Tape joints.
If ducting does not fit securely,
an adapter may need to be purchased.
D15 |
F |
Screw
15
3/12/06 5:20:44 PM
