KEY to Symbols, Symbols on the machine | Husqvarna 1150902-95

KEY TO SYMBOLS

Symbols on the machine:

WARNING! Chain saws can be dangerous! Careless or improper use can result in serious or fatal injury to the operator or others.

Please read the operator’s manual carefully and make sure you understand the instructions before using the machine.

Always wear:

•Approved protective helmet

•Approved hearing protection

•Protective goggles or a visor

Both of the operator′s hands must be used to operate the chain saw.

Never operate a chain saw holding it with one hand only.

Contact of the guide bar tip with any object must be avoided.

Tip contact may cause the guide bar to move suddenly upward and backward (so-called kickback), which may cause serious injury.

Other symbols/decals on the machine refer to special certiﬁcation requirements for certain markets.

2 – English

Symbols in the operator’s manual:

Switch off the engine by moving the stop switch to the STOP position before carrying out any checks or maintenance.

Always wear approved protective gloves.

Regular cleaning is required.

Visual check.

Protective goggles or a visor must be worn.

Refuelling.

Filing with oil and adjusting oil ﬂow.

The chain brake must be engaged when the chain saw is started.

Image 2

Husqvarna 1150902-95 KEY to Symbols, Symbols on the machine, Symbols in the operator’s manual

Contents

455e Rancher Rancher 460 Rancher Symbols in the operator’s manual KEY to SymbolsSymbols on the machine EPA Contents Introduction Dear customer What is WHAT? What is what on the chain saw? General Safety Precautions Before using a new chain saw Personal protective equipment Machine′s safety equipmentAlways use common sense Chain brake and front hand guard General Safety Precautions Right hand guard Throttle lockoutChain catcher Vibration damping system Stop switchCutting equipment Mufﬂer Chain Cutting equipment designed to reduce kickbackBar Sharpening your chain and adjusting depth gauge setting General information on sharpening cutting teeth Tensioning the chain Filling with chain oil Lubricating cutting equipment455e Rancher Checking chain lubrication Checking wear on cutting equipment Chain drive sprocketNeedle bearing lubrication Bar Rancher, 460 Rancher AssemblyFitting the bar and chain 455e Rancher Assembly Fuel Handling Fuel Transport and storage Fuel safetyFueling Long-term storage Cold engine Starting and StoppingStarting and stopping Warm engine Stopping Before use Basic safety rulesWorking Techniques General working instructions General rules Basic cutting technique Terms Limbing Felling direction Tree felling techniqueSafe distance Clearing the trunk and preparing your retreat Directional cuts Felling cut Freeing a trapped tree General adviceFreeing a tree that has fallen badly Cutting trees and branches that are in tension Cutting the trunk into logs How to avoid kickbackWhat is kickback? General MaintenanceCarburetor adjustment Checking the front hand guard Correctly adjusted carburetorChecking brake band wear Checking the inertia brake release Throttle lockout Changing a broken or worn starter cord MufﬂerStarter Changing a broken recoil spring Air ﬁlterTensioning the recoil spring Fitting the starter Lubricating the bar tip sprocket Adjustment of the oil pumpSpark plug Needle bearing lubrication Temperature -5C 23F or colder Air Injection centrifugal cleaningTemperature 0C 32F or colder Winter use Maintenance schedule Daily maintenance Weekly maintenance Monthly maintenance Technical Data Technical data Bar and chain combinations Saw chain ﬁling and ﬁle gauges Consequential Damages Husqvarna Forest Federal Emission Control Warranty StatementRepair or Replacement of Parts Repair or Kickback safety precautions American Standard Safety PrecautionsSafety precautions for chain saw users Other safety precautions 1150902-95