What is WHAT?

What is what on the chain saw?

1	Cylinder cover	17	Chain catcher
2	Front handle	18	Clutch cover
3	Chain brake and front hand guard	19	Rear handle with right hand guard
4	Starter	20	Throttle control
5	Chain oil tank	21	Throttle lockout
6	Starter handle	22	Decompression valve
7	Adjuster screws carburetor	23	Combination spanner
8	Choke control/Start throttle lock	24	Chain tensioning screw
9	Rear handle	25	Operator’s manual
10	Stop switch (Ignition on/off switch.)	26	Transport guard
11	Fuel tank	27	Oil pump adjustment screw
12	Mufﬂer	28	Switch for heated handle (Models 346XPG, 353G)
13	Bar tip sprocket	29	Information and warning decal
14	Chain	30	Product and serial number plate
15	Bar	31	Air purge
16	Bumper spike	32	Felling direction mark

6 – English

Page 6

Image 6

Husqvarna 1153163-95 manual What is WHAT?, What is what on the chain saw?

Contents

346XP, 346XPG, 346XP Tech 353, 353G English KEY to Symbols Symbols on the machineSymbols in the operator’s manual EPA Contents Introduction Dear customer What is WHAT? What is what on the chain saw? General Safety Precautions Before using a new chain sawAlways use common sense Machine′s safety equipment Personal protective equipmentChain brake and front hand guard General Safety Precautions Right hand guard Throttle lockoutChain catcher Vibration damping system Mufﬂer Stop switchCutting equipment General rules Cutting equipment designed to reduce kickback BarChain Sharpening your chain and adjusting depth gauge setting General information on sharpening cutting teeth Tensioning the chain Lubricating cutting equipment Needle bearing lubrication Checking wear on cutting equipment Assembly Fitting the bar and chainWorking with the chain Fuel Handling Fuel Transport and storage Fuel safetyFueling Long-term storage Cold engine Starting and StoppingStarting and stopping Warm engine Stopping Before use Basic safety rulesWorking Techniques General working instructions Clutch cover causing the chain to CleaningJam. Always stop the engine before Basic cutting technique Terms Limbing Felling direction Tree felling techniqueSafe distance Clearing the trunk and preparing your retreat Directional cuts Felling cut Freeing a trapped tree General adviceFreeing a tree that has fallen badly Cutting trees and branches that are in tension How to avoid kickback What is kickback? Maintenance Carburetor adjustmentGeneral Correctly adjusted carburetor High speed jet H Checking the brake trigger Mufﬂer StarterChanging a broken or worn starter cord Changing a broken recoil spring Air ﬁlterTensioning the recoil spring Fitting the starter Lubricating the bar tip sprocket Adjustment of the oil pumpSpark plug Needle bearing lubrication When making adjustments Air Injection centrifugal cleaningTemperature 0C 32F or colder Cooling system Heated handles Electrical carburetor heating346XPG, 353G Maintenance schedule Daily maintenance Weekly maintenance Monthly maintenance Technical Data Technical data Recommended cutting equipment for Canada Bar and chain combinationsSaw chain ﬁling and ﬁle gauges 050 Federal Emission Control Warranty Statement Your Warranty Rights and Obligations Kickback safety precautions American Standard Safety PrecautionsSafety precautions for chain saw users Other safety precautionsPage Original instructions 1153163-95