ASSEMBLY
Fitting the trimmer guard and trimmer head
SFit the correct trimmer guard (A) for use with the trimmer head. Hook the trimmer guard/combination guard onto the fitting on the shaft and secure with the bolt (D).
DB
C
AA
SFit the drive disc (B) on the output shaft. S Turn the shaft until one of the holes in the drive disc aligns with the corresponding
hole in the gear housing.
S Insert the locking pin (C) in the hole to lock the shaft.
S Screw on the trimmer head (H) in the op- posite direction to the direction of rota- tion.
H
STo dismantle, follow the instructions in the reverse order.
545196786 Rev. 2 4/30/09 |
