Operation

Checklist Before Starting Engine

Review the unit’s assembly to confirm you have performed all of the following:

1.Make sure handle is in place and secure.

2.Check that oil has been added to proper level in engine crankcase.

3.Add proper fuel to fuel tank.

4.Check for properly attached hose connections.

5.Check to make sure there are no kinks, cuts, or damage to high pressure hose.

6.Provide a proper water supply (not to exceed 100°F) at an adequate flow.

7.Be sure to read “Safety Rules” and “How To Use Pressure Washer” before using pressure washer.

HOW TO USE PRESSURE WASHER

If you have any problems operating your pressure washer, please call the pressure washer helpline at 1-877-224-0458.

How to Start Engine

The best way to start your pressure washer for the first time is to follow these instructions step–by–step. This starting information also applies if you have let the it sit idle for at least a day.

1.Place pressure washer near an outside water source capable of supplying water at a flow rate greater than 5.0 gallons per minute and no less than 20 PSI at pressure washer end of garden hose.

2.Make sure unit is in a level position.

3.Check that high pressure hose is connected to spray gun and pump. See “Preparing Pressure Washer for Use” for illustrations.

4.Connect garden hose to water inlet on pressure washer pump. Turn ON water.

CAUTION

DO NOT run the pump without the water supply connected and turned on.

•Damage to equipment resulting from failure to follow this instruction will void warranty.

5.Squeeze trigger on gun until you have a steady stream of water. This purges pump of air and impurities.

6.Attach nozzle extension to spray gun (Figure 5). Tighten by hand.

Figure 5 — Connect Nozzle Extension to Spray Gun

7.Choose spray tip you want to use and insert it into nozzle extension. See “How to Use Spray Tips”.

8.Apply safety latch to spray gun trigger (Figure 6).

Figure 6 — Spray Gun with Safety Latch Engaged

Safety Latch

9.Start engine according to instructions given in engine owner’s manual.

NOTE: If the recoil starter is hard to pull, squeeze the spray gun trigger to relieve internal pump pressure.

CAUTION

Avoid injury from kickback.

•Squeeze trigger on spray gun each time recoil starter is pulled and engine fails to start.

How to Stop Pressure Washer

•Turn engine off according to instructions given in engine owner’s manual.

•Squeeze trigger on the spray gun to relieve pressure in the hose.

NOTE: A small amount of water will squirt out when you release the pressure.

8

Page 7 Page 9
Page 8
Image 8
Husqvarna 1337PW owner manual HOW to USE Pressure Washer, Checklist Before Starting Engine, How to Start Engine
Page 7 Page 9

1337PW specifications

The Husqvarna 1337PW is a powerful pressure washer designed for both residential and commercial cleaning tasks. With its robust construction and versatile features, this machine stands out in the market for its efficiency and usability.

At the heart of the 1337PW is a reliable and efficient electric motor that delivers a significant amount of pressure, making it ideal for tackling tough dirt and grime. The unit offers a maximum pressure of 2000 PSI and a flow rate of 1.3 GPM, ensuring that users can clean a variety of surfaces effectively. This combination is suitable for tasks like washing cars, cleaning driveways, patios, decks, and siding, allowing for an extensive range of applications.

One of the main features of the Husqvarna 1337PW is its lightweight and portable design. Weighing in at just 36 pounds, it is easy to maneuver, and the integrated wheel system enhances mobility across various terrains. The compact design allows for convenient storage, making it an excellent choice for homeowners with limited space.

The pressure washer is equipped with multiple nozzles that can be easily swapped out, providing flexibility for different cleaning tasks. These nozzles include 0°, 15°, 25°, and soap spray settings, giving users the ability to adjust the pressure and spray pattern according to their specific needs. This versatility ensures that whether you're dealing with delicate surfaces or tougher materials, the 1337PW has a nozzle that can handle the job.

In terms of technology, the Husqvarna 1337PW features an Automatic Stop System that enhances safety and prolongs the lifespan of the motor. The system automatically shuts off the pump when the trigger is not engaged, reducing energy consumption and wear on the unit.

The durable construction is further complemented by the inclusion of a built-in detergent tank, which simplifies the process of mixing and applying soap for those more challenging cleaning tasks. The easy-to-access tank allows for effortless refills so users can spend more time cleaning and less time preparing.

In summary, the Husqvarna 1337PW is an exceptional pressure washer that delivers power, versatility, and ease of use. With its lightweight design, adjustable nozzles, and thoughtful safety features, it stands as a reliable solution for anyone seeking an effective cleaning tool for both home and professional use. Whether you are tackling routine maintenance or deep cleaning jobs, the 1337PW is equipped to meet your demands.
Top Page Image Contents