Husqvarna 2000 Ec Declaration Of Conformity, Technical Specifications, Technical Data, Engine

TECHNICAL SPECIFICATIONS

Engine

Model		Robin EX 27
Engine oil volume,	1.0/1.0
quarts/liters
Gasoline tank	1.6/6.1
volume, gal/liters
Type		Air cooled, 4-cycle, single slant cylinder,
		overhead camshaft, gasoline engine
Air filter		Cyclonic type
Oil system		Oil alert with auto shut down sensor
Muffler		Silent type 80 dbA, exhaust deflector,
		spark arrestor
Emissions		Complies with EPA Phase 2 and CARB
		Tier II USA regulations
Cooling		Air cooled with internal and external
		cooling fins
Cylinder		Aluminum with cast iron liner
Controls		Engine manual throttle, choke and fuel
		shut off levers, manual on/off switch
Weight and Dimensions
Weight – dry, lbs/kg			260/118
Weight with gasoline and oil full, lbs/kg			272/124
Length (handle folded in), inch/mm			54/1372
Width, inch/mm			23/584
Height, inch/mm			39.5/1003
Blade
Material cut		Green concrete only
Blade type		10.0” (254 mm) or 9.0” (229 mm) dry cut
		with tri-arbor
Blade rotation		Counter clockwise, upcutting

Blade shaft speed,	3200
rpm
Cutting depth	1 to 1 1/2 inch (25 to 38 mm) depending
	on amount of blade wear
Cutting distance	3 1/2 / 89
from wall, inch/mm

Average cutting rate - Estimate only. Speed will vary with job conditions and concrete mixes.

Soft aggregates, ft/min / m/min	18/5.5
Medium aggregates, ft/min / m/min	13/4.0
Hard aggregates, ft/min / m/min	7/2.1

Blades are available in 10.0 inch (254 mm) and 9.0 inch (229 mm) diameters and in 0.100 inch (2.5 mm), 0.250 inch (6.4 mm), 0.380 inch (9.7 mm), and 0.500 inch (12.7 mm) widths.

Noise emissions (see note 1)

Sound power level, measured dB(A)	101
Sound power level, guaranteed dB(A)	102
Sound levels (see note 2)
Sound pressure level at the operators ear, dB(A)	87
Vibration levels, ahv (see note 3)
Handle right, m/s2	3,0
Handle left, m/s2	3,2

Note 1: Noise emissions in the environment measured as sound power (LWA) in conformity with EC directive 2000/14/EC.

Note 2: Noise pressure level according to EN 13862. Reported data for noise pressure level has a typical statistical dispersion (standard deviation) of 1.0 dB(A).

Note 3: Vibration level according to EN 13862. Reported data for vibration level has a typical statistical dispersion (standard devia- tion) of 1 m/s2.

TECHNICAL DATA

CALIFORNIA AIR RESOURCES BOARD (CARB): This machine is considered a preempt Off-Road Application as relating to CARB stan-

dards. Under construction equipment, and in particular, as a Saws : concrete, masonry, cutoff, with engine power less than 19KW (25hp), CARB standards do not apply to this machine.

For more information see the website http://www.arb.ca.gov/msprog/offroad/preempt.htm

EC DECLARATION OF CONFORMITY

Husqvarna AB, SE-433 81 Göteborg, Sweden, tel: +46-31-949000, declares under sole responsibility that the Husqvarna Soff-Cut 2000 dating from 2010 serial numbers and onwards (the year is clearly stated on the rating plate, followed by the serial number), complies with the requirements of the COUNCILíS DIRECTIVE:

•of May 17, 2006 ”relating to machinery” 2006/42/EC

•of December 15, 2004 ”relating to electromagnetic compatibility” 2004/108/EC.

•of May 8, 2000 ”relating to the noise emissions in the environment” 2000/14/EC.

The following standards have been applied: EN ISO 12100:2003, EN 55014-1:2006, EN 55014-2/A1:2001, EN 61000-3-2:2006, EN 61000- 3-3/A1/A2:2005, EN 13862/A1:2009.

Huskvarna December 29, 2009

Henric Andersson

Vice President, Head of Power Cutters and Construction Equipment

(Authorized representative for Husqvarna AB and responsible for technical documentation.)