Husqvarna 325RDX, 323R, 325RX manual Technical Data, Technical data

TECHNICAL DATA

Technical data

Technical data	323R	323R (USA)
Engine
Cylinder displacement, cu.in/cm3	1,50/24,5	1,50/24,5
Cylinder bore, inch/mm	1,34/34,0	1,34/34,0
Stroke, inch/mm	1,06/27	1,06/27
Idle speed, rpm	2700	2700
Recommended max. fast idle speed, rpm	11000-11700	11000-11700
Speed of output shaft, rpm	8014	8014
Max. engine output, acc. to ISO 8893, kW/ rpm	0,9/9000	0,8/9000
Catalytic converter muffler	No	Yes
Speed-regulated ignition system	Yes	Yes
Ignition system
Manufacturer/type of ignition system	WalbroMB/SEM AM49	WalbroMB/SEM AM49
Spark plug	Champion RCJ 7Y	Champion RCJ 7Y
Electrode gap, inch/mm	0,02/0,5	0,02/0,5
Fuel and lubrication system
Manufacturer/type of carburetor	Zama C1Q	Zama C1Q
Fuel tank capacity, US pint/litre	1,06/0,5	1,06/0,5
Weight
Weight without fuel, cutting attachment and guard, Lbs/kg	9,9/4,5	9,9/4,5

Sound levels

(see note 1)

Equivalent sound pressure level at the user′s ear, measured 88/97 according to ANSI B175.3-1997, dB(A), min/max:

Vibration levels
Vibration levels at handles, measured according to
ANSI B175.3-1997, m/s2
At idle, left/right handles, min.:	2,0/2,0
At idle, left/right handles, max.:	3,2/2,7
At max. speed, left/right handles, min.:	2,2/2,5
At max. speed, left/right handles, max.:	6,0/8,5

88/97

2,0/2,0

3,2/2,7

2,2/2,5

6,0/8,5

Note 1: Equivalent noise pressure level is calculated as the time-weighted energy total for noise pressure levels under various

working conditions with the following time distribution: 1/2 idle and 1/2 max. speed.

NOTE! Noise pressure at the user’s ear and vibration on the handles are measured with all the machine’s approved cutting equipment fitted. The table indicates the highest and lowest values.

1151416-95 Rev. 1 2008-12-23 English – 29