Contents

Contents
KEY TO SYMBOLS
Symbols	2
CONTENTS
Contents	3
Note the following before starting:	3
INTRODUCTION
Dear customer!	4
WHAT IS WHAT?
What is what?	5
GENERAL SAFETY PRECAUTIONS
Important	6
Personal protective equipment	6
Machine′s safety equipment	7
ASSEMBLY
Fitting the hand guard and loop handle	10
Fitting the handle	10
Fitting the cutting head	10
Adjusting the harness	10
Fitting the impact guard	10
FUEL HANDLING
Fuel safety	11
Fuel	11
Fueling	12
STARTING AND STOPPING
Check before starting	13
Starting and stopping	13
WORKING TECHNIQUES
General working instructions	15
MAINTENANCE
Carburetor	17
Mufﬂer	18
Cooling system	19
Spark plug	19
Air ﬁlter	19
Gear housing	20
Cleaning and lubrication	20
Maintenance schedule	21
TECHNICAL DATA
Technical data	22
FEDERAL EMISSION CONTROL WARRANTY
STATEMENT
YOUR WARRANTY RIGHTS AND OBLIGATIONS	23

Note the following before starting:

Please read the operator’s manual carefully.

Long-term exposure to noise can result in permanent hearing impairment. So always use approved hearing protection.

WARNING! Under no circumstances may the

!design of the machine be modiﬁed without the permission of the manufacturer. Always use genuine accessories. Non-authorized modiﬁcations and/or accessories can result in serious personal injury or the death of the operator or others.

Your warranty may not cover damage or liability caused by the use of non-authorized accessories or replacement parts.

WARNING! Incorrect or careless use of a

!hedge trimmer can turn it into a dangerous tool that can cause serious or even fatal injury. It is extremely important that you read and understand the contents of this operator’s manual.

This label certify that the product has been certiﬁed in accordance with American exhaust requirements EPA 1.

This label certify that the product has been certiﬁed in accordance with American exhaust requirements EPA 2.

The Emissions Compliance Period referred to on the Emission Compliance label indicates the number of operating hours for which the engine has been shown to meet Federal emissions requirements. Category C = 50 hours, B = 125 hours, and A = 300 hours.

For customer assistance call: 704-921-7000 or contact us at

our website: www.husqvarna.com

English – 3

Husqvarna 323HE3, 325HDA55 manual Contents

Models: 323HE3 325HDA55