MAINTENANCE

Gear housing

There are three grease nipples on the gear housing. Use a grease gun to top up with grease. This should be carried out approximately every 20 working hours. Use Husqvarna special grease, part no. 503 98 96-01.

CAUTION! The gear housing must not be filled completely with grease. The grease expands as the machine heats up during operation. If the gear housing was completely filled with grease it could damage the seals and lead to leakage of grease.

The grease in the bevel gear does not normally need to be changed except if repairs are carried out.

Cleaning and lubrication

After you have used the machine clean any resin and plant residue from the blades using cleaning agent 531 00 60-75 (UL22).

Always lubricate the blade bars with special grease, part no. 531 00 60-74 (UL 21) before use.

Maintenance schedule

Below you will find some general maintenance instructions. If you need further information please contact your service workshop.

Daily maintenance

•Check throttle trigger and throttle trigger lockout function.

•Check that the stop switch works correctly.

•Check that the blades do not move when the engine is idling or when the choke is in the start throttle position.

•Clean the outside of the machine.

•Check that the harness is undamaged. (325HE4)

•Check that the blade guard is not damaged or cracked. Replace the blade guard if it is exposed to impact or is cracked.

•Check that the blade is properly centered, sharp and without cracks.

•Check that the hand guard is not damaged. Replace the guard if damaged.

•Check that the screws that hold the blades together are correctly tightened.

•Check that the transport guard for the blade is intact and that it can be secured correctly.

•Check that nuts and screws are tight.

•Check that there are no fuel leaks from the engine, tank or fuel lines.

Weekly maintenance

•Check the starter and starter cord.

•Check that the vibration damping elements are not damaged.

•Clean the carburettor area.

•Clean the outside of the spark plug. Remove it and check the electrode gap. Adjust the gap to 0.5 mm (.20”), or replace the spark plug. Check that the spark plug is fitted with a suppressor.

•Clean the cooling fins on the cylinder and check that the air intake near the starter is not blocked.

•Fill the gear housing with grease. This should be carried out approximately every 20 working hours.

•Clean the air filter.

•Clean or replace the spark arrestor mesh on the muffler (only applies to mufflers without a catalytic converter).

Monthly maintenance

•Clean the fuel tank.

•Clean the outside of the carburettor and the space around it.

•Clean the fan and the area around it.

•Check fuel hose for cracks or other damage. Change if necessary.

•Change the fuel filter in fuel tank.

•Check the clutch, clutch springs and the clutch drum for wear. Replace if necessary.

•Check electrical wires and connections.

•Replace the spark plug. Check that the spark plug is fitted with a suppressor.

•Change the air filter.

•Check and clean the spark arrestor mesh on the muffler (only applies to mufflers fitted with a catalytic converter).

English – 19

Page 18 Page 20
Page 19
Image 19
Husqvarna 325HE3 manual Gear housing, Cleaning and lubrication, Maintenance schedule
Page 18 Page 20

325HE3 specifications

The Husqvarna 325HE3 is an advanced, reliable, and versatile professional hedge trimmer designed for both efficiency and comfort. This robust tool is well-suited for landscapers, gardeners, and maintenance professionals who require powerful performance in various trimming and shaping tasks.

One of the key features of the 325HE3 is its powerful 25.4cc X-Torq engine. This engine technology ensures maximum power output while minimizing fuel consumption and exhaust emissions. This makes the trimmer not only environmentally friendly but also cost-effective for prolonged use. The lightweight design of the engine contributes to lower overall weight, enhancing maneuverability during operation.

The Husqvarna 325HE3 boasts a unique articulated cutting head with a 135-degree range of adjustment. This allows for precise cutting at various angles, ensuring that users can reach tight spots and trim hedges effectively without straining their bodies. The cutting blades are double-sided and are constructed from hardened steel, providing long-lasting sharpness and durability while minimizing wear and tear.

Comfort is a major consideration in the design of the 325HE3. It features a cushioned rear handle and an ergonomic front handle that allows for a firm grip and reduces vibration during use. This ergonomic design helps reduce operator fatigue, enabling longer periods of operation without discomfort. The trimmer also comes equipped with a protective blade cover that ensures safety during storage and transport.

In addition, the Husqvarna 325HE3 incorporates advanced technologies such as LowVib, which minimizes vibrations during operation, contributing to user comfort and reducing the risk of long-term injuries. The air filtration system is designed to prolong engine life and enhance performance by keeping the airflow clean and efficient.

The ease of maintenance is also a highlight of the Husqvarna 325HE3. The easily accessible components allow for quick inspections and servicing, making it user-friendly for people seeking to keep their equipment in top condition.

Overall, the Husqvarna 325HE3 is a professional-grade hedge trimmer that seamlessly combines power, ergonomics, and advanced features, making it a preferred choice for those who demand excellence in their landscaping tools. Whether for commercial use or personal gardening projects, it stands out as a reliable companion for all trimming needs.
Top Page Image Contents