KEY TO SYMBOLS
Symbols
WARNING! Incorrect or careless use of a hedge trimmer can turn it into a dangerous tool that can cause serious or even fatal injury. It is extremely important that you read and understand the contents of this operator’s manual.
Please read the operator’s manual carefully and make sure you understand the instructions before using the machine.
Always wear:
• Approved hearing protection
• Approved eye protection
This product is in accordance with applicable EC directives.
Cutting tool. Do not touch the tool without first switching off the engine.
This machine is not electrically insulated. If the machine
touches or comes close to high- voltage power lines it could lead
to death or serious bodily injury. Electricity can jump from one point to another by arcing. The
higher the voltage, the greater the distance electricity can jump. Electricity can also travel through branches and other
objects, especially if they are
wet. Always keep a distance of at least 10 m between the machine and
This machine can be dangerous! The operator of the machine must ensure, while working, that no persons or animals come closer than 15 metres.
Arrows which show limits for handle positioning.
Always wear approved protective gloves.
Wear sturdy,
Noise emission to the environment according to the European Community’s Directive. The machine’s emission is specified in chapter Technical data and on label.
Other symbols/decals on the machine refer to special certification requirements for certain markets.
The engine is switched off by moving the stop switch to the stop position. CAUTION! The stop switch
automatically returns to the start position. In order to prevent unintentional starting, the spark plug
cap must be removed from the spark plug when assembling, checking and/or performing maintenance.
Always wear approved protective gloves.
Regular cleaning is required.
Visual check.
Protective goggles or a visor must be worn.
2 – English
