MAINTENANCE

Carburettor

Your Husqvarna product has been designed and manufactured to specifications that reduce harmful emissions. After the engine has used 8-10 tanks of fuel the engine will be run-in. To ensure that it continues to run at peak performance and to minimise harmful exhaust emissions after the running-in period, ask your dealer/ service workshop (who will have a rev counter at their disposal) to adjust your carburettor.

Function

•The carburettor governs the engine’s speed via the throttle control. Air and fuel are mixed in the carburettor. The air/fuel mixture is adjustable. Correct adjustment is essential to get the best performance from the machine.

•Adjusting the carburettor means that the engine is adapted to local operating conditions, e.g. climate, altitude, petrol and the type of 2-stroke oil.

•The carburettor has three adjustment controls: L = Low speed jet

H = High speed jet

T = Idle adjustment screw

L

H

T

•The L and H-jets are used to adjust the supply of fuel to match the rate that air is admitted, which is controlled with the throttle. If they are screwed clockwise the air/fuel ratio becomes leaner (less fuel) and if they are turned anti-clockwise the ratio becomes richer (more fuel). A lean mixture gives a higher engine speed and a rich mixture gives a lower engine speed.

•The T-screw regulates the throttle setting at idle speed. If the T-screw is turned clockwise this gives a higher idle speed; turning it anti-clockwise gives a lower idle speed.

Basic setting

•The basic carburettor settings are adjusted during testing at the factory. The basic setting is richer than the optimal setting and should be maintained for the first few hours the machine is in use. The carburettor should then be finely adjusted. Fine adjustment should be carried out by a skilled technician.

CAUTION! If the cutting attachment rotates when the engine is idling the idle adjustment screw T should be turned anti-clockwise until the cutting attachment stops.

Adjustment of the idle speed

Before any adjustments are made, make sure that the air filter is clean and the air filter cover is fitted.

Adjust the idle speed using the idle adjustment screw T, if it is necessary to readjust. First turn the idle adjustment screw T clockwise until the cutting attachment starts to rotate. Then turn the screw anticlockwise until the cutting attachment stops. The idle speed is correctly adjusted when the engine will run smoothly in every position. The idle speed should also be well below the speed at which the cutting attachment starts to rotate.

T

Rec. idle speed: See the Technical data section.

!

WARNING! If the idle speed cannot be

adjusted so that the cutting attachment

 

 

stops, contact your dealer/service

 

workshop. Do not use the machine until

 

it has been correctly adjusted or

 

repaired.

Muffler

CAUTION! Some mufflers are fitted with a catalytic converter. See chapter on Technical data to see whether your machine is fitted with a catalytic converter.

The muffler is designed to reduce the noise level and to direct the exhaust gases away from the operator. The exhaust gases are hot and can contain sparks, which may

English – 21

Page 20 Page 22
Page 21
Image 21
Husqvarna 333RJ, 335RJx manual Maintenance, Carburettor, Muffler
Page 20 Page 22

333RJ, 335RJx specifications

The Husqvarna 335RJx and 333RJ are powerful and versatile string trimmers designed for both professionals and passionate homeowners. These models boast impressive features and cutting-edge technologies that enable users to handle even the toughest grass and weeds with ease.

One of the standout features of the Husqvarna 335RJx and 333RJ is their lightweight design. Weighing in at just over 10 pounds, these trimmers are easy to maneuver, reducing user fatigue during extended use. The ergonomic handle design provides comfort and control, allowing for precise trimming in tight spaces and around obstacles without strain.

Equipped with a high-performance X-Torq engine, these models deliver superior power and fuel efficiency. This technology reduces harmful emissions, making them environmentally friendly while maintaining impressive performance. The engines are designed to provide more torque at low RPM, enhancing cutting efficiency and enabling users to tackle thicker vegetation without compromising speed.

Both models feature Husqvarna's Auto Return Stop Switch, which simplifies the starting process. The stop switch automatically returns to the ON position, ensuring that the trimmer is ready to go with minimal effort. This design reduces downtime and increases productivity, making the user experience more efficient.

The cutting equipment on the Husqvarna 335RJx and 333RJ is equally impressive. These trimmers come with a high-capacity trimmer head that allows for quick line replacement. The tap-and-go feature permits users to extend the line effortlessly by tapping the head on the ground, enhancing practicality during operation. Furthermore, the cutting width of 18 inches ensures that users can cover a large area in a shorter amount of time.

Durability is a key characteristic of these models. Constructed with high-quality materials, the trimmers are built to withstand rigorous usage, ensuring longevity and reliable performance. The double shoulder harness further distributes the weight evenly, providing additional support during operation and allowing for greater control while trimming.

In conclusion, the Husqvarna 335RJx and 333RJ offer a combination of power, efficiency, and user-friendly design. With their advanced engine technology, comfortable handling, and practical features, these string trimmers are ideal for anyone looking to maintain their landscape with ease and precision. Whether for professional landscaping or home gardening, these models stand out in delivering performance and reliability.
Top Page Image Contents