MAINTENANCE
Maintenance schedule
The following is a list of the maintenance that must be performed on the machine. Most of the items are described in the Maintenance section.
Daily maintenance | Weekly maintenance | Monthly maintenance | |
|
|
| |
| On chain saws without a catalytic | Check the brake band on the chain brake | |
| for wear. Replace when less than 0.6 mm | ||
Clean the outside of the machine. | converter, check the cooling system | ||
(0,024 inch) remains at the most worn | |||
| weekly. | ||
| point. | ||
|
| ||
|
|
| |
Check that the components of the throttle | Check the starter, starter cord and return | Check the clutch centre, clutch drum and | |
control work safely. (Throttle lock and | spring. | clutch spring for wear. | |
throttle control.) | |||
|
| ||
|
|
| |
Clean the chain brake and check that it |
|
| |
operates safely. Make sure that the chain | Check that the vibration damping | Clean the spark plug. Check that the | |
catcher is undamaged, and replace it if | elements are not damaged. | electrode gap is 0.5 mm (0,020 inch). | |
necessary. |
|
| |
|
|
| |
The bar should be turned daily for more |
|
| |
even wear. Check the lubrication hole in | File off any burrs from the edges of the |
| |
the bar, to be sure it is not clogged. Clean | Clean the outside of the carburetor. | ||
bar. | |||
the bar groove. If the bar has a sprocket |
|
| |
tip, this should be lubricated. |
|
| |
|
|
| |
Check that the bar and chain are getting | Clean or replace the spark arrestor mesh | Check fuel hose for cracks or other | |
sufficient oil. | on the muffler. | damage. Change if necessary. | |
|
|
| |
Check the saw chain with regard to visible |
|
| |
cracks in the rivets and links, whether the |
|
| |
saw chain is stiff or whether the rivets and | Clean the carburetor compartment. | Empty the fuel tank and clean the inside. | |
links are abnormally worn. Replace if |
|
| |
necessary. |
|
| |
|
|
| |
Sharpen the chain and check its tension |
|
| |
and condition. Check the drive sprocket | Clean the air filter. Replace if necessary. | Empty the oil tank and clean the inside. | |
for excessive wear and replace if | |||
|
| ||
necessary. |
|
| |
|
|
| |
Clean the starter units air intake. |
| Check all cables and connections. | |
|
|
| |
Check that nuts and screws are tight. |
|
| |
|
|
| |
Check that the stop switch works |
|
| |
correctly. |
|
| |
|
|
| |
Check that there are no fuel leaks from |
|
| |
the engine, tank or fuel lines. |
|
| |
|
|
| |
On chain saws with a catalytic converter, |
|
| |
check the cooling system daily. |
|
| |
|
|
|
English – 33
