Manuals / Brands / Power Tools / Saw / Husqvarna / Power Tools / Saw

Husqvarna 343FRM Temperature 0C (32F) or colder:, Temperature -5C (23F) or colder:

1 44

Download 44 pages, 2.31 Mb

MAINTENANCE

English – 33

Temperature 0°C (32°F) or colder:

Fit the covers for the starter housing and air ﬁlter holder

using the three screws provided as shown in the ﬁgure.

Remove the air ﬁlter and air ﬁlter cover from the machine.

Fit the air ﬁlter and air ﬁlter cover supplied with the winter

kit.

Temperature -5°C (23°F) or colder:

Dismantle the machine’s wear guard, and ﬁt the wear

guard from the winter kit as shown in the ﬁgure. Pay

particular attention that the opening on the air duct is

positioned in the centre of the hole in the air ﬁlter holder.

IMPORTANT! If the temperature rises above -5°C

(23°F) or 0°C (32°F) respectively the machine MUST be

restored to its normal set-up. Otherwise there is a risk of

overheating, which can cause severe engine damage.

IMPORTANT! Any maintenance other than that

described in this manual must be carried out by your

servicing dealer (retailer).

IMPORTANT! Use only HUSQVARNA replacement

parts. Use of other brands of replacement parts can

cause damage to your unit or injury to the operator or

others. Your warranty does not cover damage or liability

caused by the use of accessories and/or attachments

not speciﬁcally recommended by HUSQVARNA.

Contents

Main KEY Symbols O SYMBOLS T CONTENTS Note the f Contents ollowing before starting: INTR Dear customer! ODUCTION Page Page Page Impor tant Personal protective equipment Mac ottle lockout Thr s safety equipment hine Stop s k release Quic hment guard Vibration damping system witch Muf er Locking nut Locking screw Cutting equipment Cutting equipment Sharpening grass cutters and grass blades Sharpening the saw blade Trimmer head Assembling the handlebar and throttle Transport position, handlebar Assembling the cutting equipment Fitting the blade guard/ combination guard, grass blade and ball-bearing-mounted support cup Fitting the blade guard and saw blade L A MC L A E F H J K L B R A G D B C Adjusting the harness and clearing saw Triobalance harness Safety release Adjusting the harness H H Correct height Correct balance FUEL HANDLING Fuel safety Transport and storage Fuel Gasoline FUEL HANDLING Mixing Fueling STARTING AND STOPPING Check before starting A B C STARTING AND STOPPING Warm engine Starting Stopping Heated handles General working instructions Basic safety rules The ABC of clearing Page Forestry clearing using a saw blade Brush cutting with a saw blade Grass clearing using a grass blade Grass trimming with a trimmer head Page Carburetor Carburetor adjustment Function Basic setting Fine adjustment Low speed jet L Fine adjustment of the idle speed T High speed jet H Correctly adjusted carburetor Adjusting the start throttle speed (355RX, 355FRM) Mufer Cooling system Air lter Cleaning the air lter Bevel gear ABC D E Drive shaft Spark plug Winter use Temperature 0C (32F) or colder: Temperature -5C (23F) or colder: 34 English Maintenance schedule TECHNICAL DATA Technical data Page FEDERAL EMISSION CONTROL WARRANTY STATEMENT YOUR WARRANTY RIGHTS AND OBLIGATIONS MANUFACTURERS WARRANTY COVERAGE OWNERS WARRANTY RESPONSIBILITIES WARRANTY COMMENCEMENT DATE