Husqvarna 356BTX manual Cooling system, Spark plug, Air filter

Models: 356BTX

1 24
Download 24 pages 19.66 Kb
Page 18
Image 18

MAINTENANCE

Loosen the muffler’s 2 screws and remove the muffler.

Pull out the spark arrestor screen and clean using a wire brush. Replace the spark arrestor screen if it is defective.

CAUTION! Never use a machine with a defective muffler.

 

!

WARNING! The muffler gets very hot

 

during use and remain so for some time

 

 

 

 

after stopping. This also applies at idle

 

 

speed. Contact can result in burns to the

 

 

skin. Remember the risk of fire!

 

 

 

Cooling system

To keep the working temperature as low as possible the machine is equipped with a cooling system.

The cooling system consists of:

4

1

2

3 5

1Air intake on the underside of the blower.

2Nozzle for cooling the cylinder

3Cooling fins on the cylinder.

4Cooling air conductor (directs cold air over the cylinder).

5 Emergency cooling nozzle

Clean the cooling system with a brush once a week, more often in demanding conditions. A dirty or blocked cooling system results in the machine overheating which causes damage to the piston and cylinder. Check that the nozzles are not blocked.

Spark plug

The spark plug condition is influenced by:

Incorrect carburetor adjustment.

An incorrect fuel mixture (too much or incorrect type of oil).

A dirty air filter.

These factors cause deposits on the spark plug electrodes, which may result in operating problems and starting difficulties.

If the machine is low on power, difficult to start or runs poorly at idle speed: always check the spark plug first before taking any further action. If the spark plug is dirty, clean it and check that the electrode gap is 0.020 inch (0.5 mm). The spark plug should be replaced after about a month in operation or earlier if necessary.

CAUTION! Always use the recommended spark plug type! Use of the wrong spark plug can damage the piston/ cylinder.

Air filter

The air filter must be regularly cleaned to remove dust and dirt in order to avoid:

Carburettor malfunctions

Starting problems

Loss of engine power

Unnecessary wear to engine parts

Excessive fuel consumption.

18 – English

Page 18
Image 18
Husqvarna 356BTX manual Cooling system, Spark plug, Air filter