Manuals / Brands / Lawn and Garden / Chainsaw / Husqvarna / Lawn and Garden / Chainsaw

Husqvarna 357XP EPA I, 357XP EPA I, 359 EPA II STARTING AND STOPPING

1 44

Download 44 pages, 2.33 Mb

20 – English

STARTING AND STOPPING

Note! Pull the front hand guard towards the front handle. The

chain brake is now disengaged. Your saw is ready for use.

• Never start a chain saw unless the bar, chain and all

covers are ﬁtted correctly. See instructions under the

heading Assembly. Without a bar and chain attached to

the chain saw the clutch can come loose and cause

serious injury.

• The chain brake should be activated when starting. Se

instructions under the heading Start and stop. Do not drop

start. This method is very dangerous because you may

lose control of the saw.

• Never start the machine indoors. Exhaust fumes can be

dangerous if inhaled.

• Observe your surroundings and make sure that there is no

risk of people or animals coming into contact with the

cutting equipment.

• Always hold the saw with both hands. The right hand

should be on the rear handle, and the left hand on the front

handle. All people, whether right or left handed, should

use this grip. Use a ﬁrm grip with thumbs and ﬁngers

encircling the chain saw handles.

Stopping

The engine is stopped by pushing the stop switch to the stop

position.

!

WARNING! Long term inhalation of the

engine’s exhaust fumes, chain oil mist and

dust from sawdust can represent a health

risk.

Contents

Main KEY TO SYMBOLS Symbols on the machine: Symbols in the operators manual: CONTENTS Contents INTRODUCTION Dear customer! WHAT IS WHAT? What is what on the chain saw? Before using a new chain saw Important Always use common sense Personal protective equipment Chain brake and front hand guard s safety equipment Machine Page Will my hand always activate the chain brake during a kickback? Vibration damping system Right hand guard Chain catcher Will my inetria activated chain brake always activate during kickback in the event of a kickback? Will my chain brake always protect me from injury in the event of a kickback? Throttle lock Stop switch Cutting equipment 11 Chain Some terms that describe the bar and chain Chain Cutting equipment designed to reduce kickback Sharpening your chain and adjusting depth gauge setting General information on sharpening cutting teeth Sharpening cutting teeth General advice on adjusting depth gauge setting Adjustment of depth gauge setting Tensioning the chain 14 Lubricating cutting equipment Chain oil Filling with chain oil Checking chain lubrication Chain drive sprocket Needle bearing lubrication Checking wear on cutting equipment ASSEMBLY Fitting the bar and chain FUEL HANDLING Fuel Gasoline Environment fuel Running-in FUEL HANDLING Fueling Fuel safety Transport and storage Long-term storage STARTING AND STOPPING Starting and stopping A Cold engine Warm engine STARTING AND STOPPING Stopping Before use: General working instructions Basic safety rules General rules Basic cutting technique General Terms There are ve important factors you should consider before making a cut: 24 Limbing Cutting Tree felling technique Safe distance Felling direction Clearing the trunk and preparing your retreat 26 Felling Freeing a tree that has fallen badly Freeing a trapped tree Cutting trees and branches that are in tension General advice: 28 How to avoid kickback What is kickback? Limbing Cutting the trunk into logs General LH T 30 Correctly adjusted carburetor Checking, maintaining and servicing chain saw safety equipment Chain brake and front hand guard Checking brake band wear Checking the front hand guard Checking the inertia brake release Page Mufer Starter Changing a broken or worn starter cord Tensioning the recoil spring Changing a broken recoil spring Air lter Spark plug Lubricating the bar tip sprocket Needle bearing lubrication Adjustment of the oil pump Cooling system + Air Injection centrifugal cleaning Winter use C (32 Temperature 0 F) or colder: Maintenance schedule TECHNICAL DATA Technical data TECHNICAL DATA Recommended original and replacement bar and chain combinations Bar and chain combinations Page 40 FEDERAL EMISSION CONTROL WARRANTY STATEMENT YOUR WARRANTY RIGHTS AND OBLIGATIONS MANUFACTURERS WARRANTY COVERAGE OWNERS WARRANTY RESPONSIBILITIES WARRANTY COMMENCEMENT DATE AMERICAN STANDARD SAFETY PRECAUTIONS Safety precautions for chain saw users Kickback safety precautions Other safety precautions