MAINTENANCE

Fine adjustment of the idling speed T

Adjust the idle speed with the T-screw. If it is necessary to re-adjust, turn the T-screw clockwise while the engine is running, until the chain starts to rotate. Then turn counter- clockwise until the chain stops. A correctly adjusted idle speed setting occurs when the engine runs smoothly in every position. It should also be good margin to the rpm when the chain starts to rotate.

WARNING! Contact your servicing

! dealer, if the idle speed setting cannot be adjusted so that the chain stops at idle. Do not use the chain saw until it has been properly adjusted or repaired.

High speed jet H

At the factory the engine is adjusted at sea level. When working at a high altitude or in different weather conditions, temperatures and atmospheric humidity, it may be necessary to make minor adjustments to the high speed jet.

CAUTION! If the high speed jet is screwed in too far, it may damage the piston/cylinder.

When test run at the factory, the high speed jet is set so that the engine satisfies the applicable legal requirements at the same time as achieving maximum performance.

The carburetor’s high speed jet is then locked using a limiter cap in the fully screwed out position.The limiter cap limits the potential to adjust the high speed jet to at most half a turn.

CAUTION! There is an integrated speed governor in the ignition system that limits the maximum speed to 13600 rpm. The maximum speed will not exceed 13600 rpm when the high speed jet is adjusted (screwed in). When the speed governor is activated, you will get the same sound experience as when the chain saw 4-cycles.

To adjust the carburetor correctly you should contact a mechanic with access to a rev counter.

CAUTION! As the spark is cut off, the rev counter does not show speeds higher than 13600 rpm.

Correctly adjusted carburetor

When the carburetor is correctly adjusted the machine accelerates without hesitation and the machine 4-cycles a little at max. speed. It is also important that the chain does not rotate at idle. If the L-jet is set too lean it may cause starting difficulties and poor acceleration. If the H- jet is set too lean the machine will have less power, poor acceleration and could suffer damage to the engine.

Checking, maintaining and servicing chain saw safety equipment

Note! All servicing and repair work on the machine requires special training. This is especially true of the machine′s safety equipment. If your machine fails any of the checks described below we recommend you to contact our servicing dealer.

Chain brake and front hand guard

Checking brake band wear

Brush off any wood dust, resin and dirt from the chain brake and clutch drum. Dirt and wear can impair operation of the brake.

Regularly check that the brake band is at least 0.024 inch (0.6 mm) thick at its thinnest point.

Checking the front hand guard

Make sure the front hand guard is not damaged and that there are no visible defects such as cracks.

Move the front hand guard forwards and back to make sure it moves freely and that it is securely anchored to the clutch cover.

English – 31

Page 30 Page 32
Page 31
Image 31
Husqvarna 372 XPG manual Fine adjustment of the idling speed T, High speed jet H, Correctly adjusted carburetor
Page 30 Page 32

372 XPG specifications

The Husqvarna 372 XPG is a powerful, professional-grade chainsaw that stands out in the market due to its superior performance and innovative technology. Designed for demanding tasks such as logging, tree felling, and heavy-duty pruning, the 372 XPG boasts impressive features that cater to professionals seeking reliability and efficiency.

One of the most notable attributes is its robust engine. The 372 XPG is equipped with a 70.1 cc X-Torq engine that delivers exceptional power. This engine design not only optimizes power output but also reduces fuel consumption and emissions, aligning with modern environmental standards. The chainsaw achieves up to 4.8 kW of power, enabling users to tackle the toughest cutting jobs with ease.

Modern technology is incorporated into the 372 XPG to enhance user experience and usability. The chainsaw features the Smart Start system, which allows for effortless starting with minimal resistance on the starter cord. This is especially beneficial for professionals who need to get the job done quickly without the frustration of a difficult start.

Another key feature is the LowVib system, which significantly reduces vibrations during operation. This technology is crucial for minimizing operator fatigue, allowing users to work for extended periods without discomfort. The ergonomic design, combined with a comfortable handle, further enhances user control and precision while cutting.

Durability is a hallmark of the Husqvarna 372 XPG. Constructed with high-quality materials, this chainsaw can withstand the rigors of professional use. Its air filtration system is designed for efficient dust and debris removal, extending the life of the engine and maintaining optimal performance over time.

Safety features are also paramount with this model. It includes a chain brake that activates instantaneously in the event of kickback, ensuring the operator's safety during use.

Overall, the Husqvarna 372 XPG combines power, technology, and durability, making it a favorite among professionals in various cutting applications. Its balanced design, advanced engine, and safety features ensure that it not only meets but exceeds expectations, underscoring Husqvarna's reputation for quality and innovation in outdoor power equipment. Whether you are a professional logger or a landscape contractor, the 372 XPG is engineered to help you achieve your goals effectively and efficiently.
Top Page Image Contents