Cutting the trunk into logs

WORKING TECHNIQUES

was being used when the kickback zone of the bar touched the object.

Kickback only occurs if the kickback zone of the bar touches an object.

Limbing

WARNING! A majority of kickback

! accidents occur during limbing. Do not use the kickback zone of the guide bar. Be extremely cautious and avoid contacting the log, other limbs or objects with the nose of the guide bar. Be extremely cautious of limbs under tension. They can spring back toward you and cause loss of control resulting in injury.

Make sure that you can stand and move about safely. Work on the left side of the trunk. Work as close as possible to the chain saw for maximum control. If possible, let the weight of the chain saw rest on the trunk.

Keep the trunk between you and the chain saw as you move along the trunk.

See instructions under the heading Basic cutting technique.

28 – English

Page 28

Image 28

Husqvarna 372XP EPA III, 1151437-95 manual Cutting the trunk into logs

Contents

Operator’s manual 365 EPA I 372XP EPA KEY to Symbols Symbols on the machineSymbols in the operator’s manual You will ﬁnd the following labels on your chain saw Contents Introduction Dear customer What is WHAT? What is what on the chain saw? General Safety Precautions Before using a new chain saw Machine′s safety equipment Always use common sensePersonal protective equipment Chain brake and front hand guard General Safety Precautions Throttle lockout Chain catcherRight hand guard Vibration damping system Stop switch Cutting equipmentMufﬂer General rules Bar Cutting equipment designed to reduce kickbackChain Sharpening your chain and adjusting depth gauge setting General information on sharpening cutting teeth Tensioning the chain Filling with chain oil Lubricating cutting equipmentChecking chain lubrication Needle bearing lubrication Chain drive sprocketChecking wear on cutting equipment Fitting the bar and chain AssemblyWorking with the chain Fuel Handling Fuel Fuel safety FuelingTransport and storage Long-term storage Starting and Stopping Starting and stoppingCold engine Warm engine Stopping Basic safety rules Working TechniquesBefore use General working instructions General rules Basic cutting technique Terms Tree felling technique LimbingLog is supported at one end. There is a high risk Safe distance Clearing the trunk and preparing your retreat Felling directionDirectional cuts Felling cut What is kickback? How to avoid kickbackFreeing a tree that has fallen badly Cutting the trunk into logs Carburetor adjustment MaintenanceGeneral Correctly adjusted carburetor High speed jet HChecking brake band wear Checking the front hand guard Checking the inertia brake release Immediately Mufﬂer Changing a broken or worn starter cord StarterTensioning the recoil spring Air ﬁlter Changing a broken recoil springFitting the starter Must always be replaced Adjustment of the oil pump When making adjustmentsSpark plug Lubricating the bar tip sprocket Air Injection centrifugal cleaning Temperature -5C 23F or colderCooling system Winter use Canada Electrical carburetor heatingOther countries Maintenance schedule Daily maintenance Weekly maintenance Monthly maintenance Technical Data Technical data Saw chain ﬁling and ﬁle gauges Federal Emission Control Warranty Statement Your Warranty Rights and Obligations American Standard Safety Precautions Safety precautions for chain sawOther safety precautions Kickback safety precautionsPage 1151437-95