Contents | Husqvarna 385XP, 390XP specs

CONTENTS

Contents
KEY TO SYMBOLS
Symbols on the machine:	2
Symbols in the operator’s manual:	2
CONTENTS
Contents	3
INTRODUCTION
Dear customer!	4
WHAT IS WHAT?
What is what on the chain saw?	5
GENERAL SAFETY PRECAUTIONS
Before using a new chain saw	6
Important	6
Always use common sense	6
Personal protective equipment	7
Machine′s safety equipment	7
Cutting equipment	10
ASSEMBLY
Fitting the bar and chain	16
FUEL HANDLING
Fuel	17
STARTING AND STOPPING
Starting and stopping	19
WORKING TECHNIQUES
Before use:	21
General working instructions	21
How to avoid kickback	28
MAINTENANCE
General	29
Carburetor adjustment	29
Checking, maintaining and servicing chain saw safety
equipment	30
Mufﬂer	32
Starter	32
Air ﬁlter	33
Spark plug	34
Lubricating the bar tip sprocket	34
Needle bearing lubrication	34
Adjustment of the oil pump	34
Cooling system	35
”Air Injection” centrifugal cleaning	35
Winter use	35
Heated handles	35
Maintenance schedule	36
TECHNICAL DATA
Technical data	37
Saw chain ﬁling and ﬁle gauges	38
FEDERAL EMISSION CONTROL WARRANTY
STATEMENT
YOUR WARRANTY RIGHTS AND OBLIGATIONS	39
AMERICAN STANDARD SAFETY PRECAUTIONS
Safety precautions for chain saw users	40

English – 3

Image 3

Husqvarna 385XP, 390XP manual Contents

Contents

385XP 390XP You will ﬁnd the following labels on your chain saw KEY to SymbolsSymbols on the machine Symbols in the operator’s manual Contents Dear customer Introduction What is what on the chain saw? What is WHAT? General Safety Precautions Before using a new chain sawAlways use common sense Machine′s safety equipment Personal protective equipmentChain brake and front hand guard General Safety Precautions Throttle lock Chain catcherRight hand guard Mufﬂer Stop switchCutting equipment Vibration damping system Chain General rulesCutting equipment designed to reduce kickback Bar Instructions considerably increases the risk of kickback Sharpening your chain and adjusting depth gauge settingGeneral information on sharpening cutting teeth Sharpening cutting teeth Tensioning the chain General advice on adjusting depth gauge settingAdjustment of depth gauge setting If the depth gauge setting is too large Checking chain lubrication Lubricating cutting equipmentChain oil Filling with chain oil Chain drive sprocket Needle bearing lubricationChecking wear on cutting equipment Fitting the bar and chain Assembly Fuel Fuel Handling Long-term storage Fuel safetyFueling Transport and storage Warm engine Starting and StoppingStarting and stopping Cold engine Stopping General working instructions Basic safety rulesWorking Techniques Before use General rules Basic cutting technique GeneralTerms Cutting Limbing Clearing the trunk and preparing your retreat Tree felling techniqueSafe distance Felling direction Felling Directional cutsFelling cut Cutting trees and branches that are in tension General adviceFreeing a tree that has fallen badly Freeing a trapped tree How to avoid kickback What is kickback?Cutting the trunk into logs Maintenance Carburetor adjustmentGeneral Checking the front hand guard Correctly adjusted carburetorHigh speed jet H Checking brake band wear Checking the brake trigger Mufﬂer StarterChanging a broken or worn starter cord Fitting the starter Air ﬁlterTensioning the recoil spring Changing a broken recoil spring Lubricating the bar tip sprocket Adjustment of the oil pumpWhen making adjustments Spark plug Heated handles Air Injection centrifugal cleaningCooling system Winter use Daily maintenance Weekly maintenance Monthly maintenance Maintenance schedule Technical data Technical Data Saw chain ﬁling and ﬁle gauges 050/1,3 mm058/1,5 mm Your Warranty Rights and Obligations Federal Emission Control Warranty Statement Other safety precautions American Standard Safety PrecautionsSafety precautions for chain saw users Kickback safety precautionsPage ´z+R1=¶5¨ Page 1150172-95 ´z+R1=¶5¨ ´z+R1=¶5¨